Hz input sensitivity
List hz input sensitivity
-
0db from 10hz to hz input sensitivity 11db frequency response + db from 20hz to hz + 0, -3output load impedance stereo 8 or 4 ohms monophonic 8 ohms rated power band 20hz to hz total harmonic distortion % maximum harmonic distortion at any power level from 250 milliwatts to rated power outputthe output rms voltage is: 49 volts across 8 ohms3v across 8 ohms 24works as it shouldcomes with panlocsmcintosh power ampspecs: stereo power output 150 watts into 4 ohm loads or 100 watts into 8 ohm loads minimum sine wave continuous average power output per channel, both channels operatingihf dynamic headroom 8 ohms, 15 volts at gain control center detent)5v across 4 ohms monophonic (bridged) 300 watts into an 8 ohm load minimum sine wave continuous average power outputthe output rms voltage is: 28not a scratch or dent or blemish on itsee specs below
$ 1400
-
Nc-90 - main channel woofer: 13cm pmd lf cone - woofer with catenary curve shape - tweeter: 3cm silk dome tweeter - magnetic shielding gold-plated 2-way binding-post speaker terminals - input power (max/nominal): 200 w/60 w - frequency response: hz - sensitivity: 89 db/283v/m) and wide dynamic range for contemporary a/v sources - dual 10cm pmd cone woofers with catenary curve shape and 3cm silk dome tweeter - magnetic shielding gold-plated banana-plug compatible speaker terminals - bi-wiring connection capability - input power (max/nominal): 200 w/60 w - frequency response: hz - sensitivity: 88 db/283 v/m - impedance: 6 ohms - dimensions (w x h x d): 186 x 310 x 177mm - weight: 4 kg/unit nc-c120 - high sensitivity (88db/2in good condition and still sound very goodi'm only selling a i'm upgrading to towerstwo nc-90 bookshelf speakers with ikea concrete stands and nc-c120 centre channel83 v/m - impedance: 6 ohms - dimensions (w x h x d): 480 x 140 x 171mm - weight: 5
$ 80
-
4 db total harmonic distortion input impedance single ended: 100 kohms balanced: 200 kohms cast: 70 ohms input sensitivity single ended or balanced: 3krell evo 402e power amplifier specifications: frequency response 20 hz to 20 khz + db signal-to-noise ratio >108 db, wideband,unweighted, referred to full power output >118 db, "a"-weighted gain 2504 ma rms output power 400 w rms at 8 ohms both channels driven 800 w rms at 4 ohms both channels drivenoutput voltage 160 v peak-to-peak 57 v rms output current 37 a peak slew rate 100 v/µs output impedance    damping factor (referred to 8 ohms) >145 at 20 hz, referred to 8 ohms > hz to 20 khz, referred to 8 ohms transformers two va (va total) for audio circuitry one 10 va for digital control circuitry power supply capacitance µf power consumption standby: 2 w (high-current standby: 260w idle: 390 w maximum: w heat output stand-by: 7 btu/hr inputs 2 single-ended via rca connector 2 balanced via xlr connector 2 cast via 4-pin bayonet connector outputs 2 pairs krell binding posts dimensions in(high-current standby: 890 btu/hrmaximum: btu/hr04 v rms cast: 3d 438 mm w x 248 mm h x 560 mm d
-
===51 lbs of power-250 watts-loved & recommended by audiophiles=== - look & sound like new-come listen before you buy!!! - manufactured by audio products international (which also makes mirage and energy) detachable grilles frequency response hz nominal impedance 8 ohm sensitivity 93 db crossover frequency hz magnetic shield nominal (rms) output power 250 watt frequency response 35 hz input impedance 8 ohm crossover channel qty 2-way driver type tweeter driver, woofer driver driver qty 1, 2 driver diameter 1 m, 8 m driver diameter (metric) 203 mm, 25 mm driver material teteron, injection molded polypropylene width 95 in weight lbs
$ 400
-
Vcd 110,made in japan miki pully inverter, input ph hzout put phase 60 hz 40 acap 19 kva, open to offer $$$$$
$ 950
-
1"h input voltages: v, 1-ph, hz input current: v - a output current: a duty cycle: a, a recommended air flow: cutting - 90 psi (51 bar) input power cable length: 10' engine drive requirement: 10 kw for full 45a outputqr code link to this post hypertherm 45 xp plasma cutter (in excellent working condition) the powermax45 xp is the most versatile and portable mm) machine on the market, with a broad set of application capabilities that make it a truly multi-purpose tool9 bar) | gouging - 60 psi (4quick specs cutting capacity: 5/8" recommended | 1-1/8" severance weight: 31 lbs (with torch) dimensions: 17
$ 2000
-
Greater than 5 input impedance110 dba (referenced to rated power) input sensitivity (for rated power)alpine v12 expert mrv- specs rms power (at 12v, 20hz—20khz) per channel into 4 ohms150w x % thd) per channel into 2 ohms4 or 2 ohms(stereo), 4 ohms (bridged) dividing network200mv to 4v slew factorv dc best (reasonable) offer gets it was used to power 2 12 inch alpine type r subs call/text thank you for looking:)50hz—200hz q factor (bandwidth)3% thd) bridged 4 ohms4v, 20hz—20khz) per channel into 4 ohms10hz—50khz(+0,-1db) signal to noise (s/n)12db power requirements50hz—200hz hp/lp(12db/octave) equalizer center frequencies10k ohms speaker impedance10 — 1 boost and cut range225w x % thd) per channel into 2 ohms3% thd) frequency response3% thd) rms power (at 14
-
05% input sensitivity: 2qr code link to this post realistic sta720 stereo receiver in great condition all functions work without any issues phono input for a turntable $110 ospecifications: tuning range: fm, mw power output: 25 watts per channel into 8ω (stereo) frequency response: 20hz to 20khz total harmonic distortion: 075 x inches year5mv (mm), 160mv (line) signal to noise ratio: 81db (mm), 92db (line) speaker load impedance: 4ω to 16ω dimensions: 16
$ 110
-
09% input sensitivity: 250mv (line) signal to noise ratio: 96db (line) output: 250mv (line) speaker load impedance: 4ω (minimum) digital inputs: coaxial, optical video connections: composite dimensions: 430 x 303 x 157mm weight: 7pick up in glenrosa!7kg accessories: remote control this is an excellent unit with speakers and standsexcellent condition, this device works greatsony str-de445 fm am stereo receiver surround sound amplifier dolby digital dts / two speakers with stands fm stereo / fm-am receiver () specifications tuning range: fm, mw power output: 80 watts per channel into 8ω (stereo) surround output: 80w (front), 80w (center), 80w (rear) frequency response: 10hz to 50khz total harmonic distortion: 0
$ 200
-
Power output: 105 watts per channel into 8ω (stereo) frequency response: 1hz to 300khz total harmonic distortion: % damping factor: input sensitivity: 1v signal to noise ratio: 120db speaker load impedance: 4ω to 16ω dimensions: 440 x 112 x 324mm weight: 9for sale kenwood m1 basic amp and c1 basic preamp in great condition$ thanks for looking
$ 200
-
08% damping factor: 30 input sensitivity: 25mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 90db (line) output: 150mv (line) speaker load impedance: 8ω to 16ω dimensions: 430 x 105 x 305mmspecifications tuning range: fm, mw power output: 20 watts per channel into 8ω (stereo) frequency response: 10hz to 50khz total harmonic distortion: 0
$ 65
-
02% damping factor: 20 input sensitivity: 2you also get power meter, signal meter and memory presets for radio stationsit has inputs for phono, cd/aux and tape monitorunit was tested and is in good working ordersignal to noise ratio: 72db (mm), 95db (line)tuning range: fm, mw power output: 50 watts per channel into 8ω (stereo) frequency response: 10hz to 70khz total harmonic distortion: 0vintage technics quartz digital synthesizer receiver that plays loud and clear5mv (mm), 150mv (line)channel separation: 55db (line) output: 150mv (line) speaker load impedance: 4ω to 16ω i use as many pictures as possible to describe the itemit has some wear and scratches as expected from age and use
$ 140
-
08% damping factor: 30 input sensitivity: 25mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 90db (line) output: 150mv (line) speaker load impedance: 8ω to 16ω dimensions: 430 x 105 x 305mm weight: 5specifications tuning range: fm, mw power output: 20 watts per channel into 8ω (stereo) frequency response: 10hz to 50khz total harmonic distortion: 0in perfect working order, selling because i have got another one i don't need two
$ 50
-
5% damping factor: 50 input sensitivity: 2mv (mm), 180mv (din), 180mv (line) signal to noise ratio: 70db (mm), 80db (line) channel separation: 45db (mm), 50db (line) output: 180mv (line), 30mv (din) speaker load impedance: 4? to 16? semiconductors: 23 x transistors, 2 x diodes dimensions: 395 x 127 x 278mm weight: 8kgsansui au-555a solid state stereo control amplifier () excellent condition asking $ obo call paul specifications power output: 25 watts per channel into 8? (stereo) frequency response: 20hz to 30khz total harmonic distortion: 0
$ 135
-
3% input sensitivity: 2fisher intergrated amplifier ca excellent condition meters light up but do not work asking $ obo call paul specifications power outage 42 watts per channel at 8ohms frequency response: 15hz to 40khz total harmonic distortion: 05mv (mm), 150mv (din), 150mv (line) signal to noise ratio: 75db (mm), 85db (din), 85db (line) dimensions: 135 x 450 x 295mm year
$ 75
-
5% damping factor: 32 input sensitivity: 2great condition both functionally and cosmetically - warm sounding amplifier with wood casespecifications: frequency response: 10hz to 40khz total harmonic distortion: 05mv (mm), 150mv (line) signal to noise ratio: 76db (mm), 90db (line) output: 150mv (line), 40mv (din) power output: 34 watts per channel into 8ω (stereo) speaker load impedance: 4ω to 16ω dimensions: 435 x 157 x 306mm weight: 11kg see pictures please text, email or call
$ 175
-
5% input sensitivity: 3mv (mm), 130mv (line) signal to noise ratio: 60db (mm), 80db (line) channel separation: 65db (line) semiconductors: 20 x transistors, 10 x diodes dimensions: 13specifications: power output: 40 watts per channel into 8 ohms (stereo) frequency response: 15hz to 50khz total harmonic distortion: 025 inches weight: 7in great working and cosmetic condition vintage dynaco sca-80q stereo solid state amplifier
$ 220
-
07% input sensitivity: 25mv (mm), 150mv (line) signal to noise ratio: 72db (mm), 97db (line) output: 150mv (line) speaker load impedance: 4ω (minimum) dimensions: 420 x 120 x 337mm weight: 7kg accessories: fm t-type antenna, am loop antenna two stereo speakers also available, see my other adspecifications tuning range: fm, mw power output: 60 watts per channel into 8ω (stereo) frequency response: 10hz to 70khz total harmonic distortion: 0
$ 60
-
input sensitivity: 2signal to noise ratio: 74db (mm), 95db (line)frequency response: 10hz to 50khzspecifications tuning range: fm, mwdimensions: 430 x x 300mm (17 x 4total harmonic distortion: 0output: 150mv (line)5mv (mm), 150mv (line)perfect working order i just don't used it any morepower output: 50 watts per channel into 8ω (stereo)speaker load impedance: 8ω to 16ω
$ 90
-
5% input sensitivity: 3mv (mm), 130mv (line) signal to noise ratio: 60db (mm), 80db (line) channel separation: 65db (line) semiconductors: 20 x transistors, 10 x diodes dimensions: 13specifications: power output: 40 watts per channel into 8 ohms (stereo) frequency response: 15hz to 50khz total harmonic distortion: 0in great working and cosmetic condition vintage dynaco sca-80q stereo solid state amplifier2kg *serviced and tested by columbus radio *no static on the knobs25 inches weight: 7
$ 220
-
5% input sensitivity: 3mv (mm), 130mv (line) signal to noise ratio: 60db (mm), 80db (line) channel separation: 65db (line) semiconductors: 20 x transistors, 10 x diodes dimensions: 13specifications: power output: 40 watts per channel into 8 ohms (stereo) frequency response: 15hz to 50khz total harmonic distortion: 0in great working and cosmetic condition vintage dynaco sca-80q stereo solid state amplifier2kg *no static on the knobs25 inches weight: 7
$ 220
-
38% damping factor: 30 input sensitivity: 6mv (mic), 2sansui g- pure power receiver, all functions working, very nice condition, can be heard hooked up, cash only local pick up, tuning range: fm, mw power output: 85 watts per channel into 8ω (stereo) under rated frequency response: 5hz to 50khz total harmonic distortion: 05mv (mm), 150mv (din), 150mv (line) signal to noise ratio: 78db (mm), 95db (line) channel separation: 60db (mm), 65db (line) output: 150mv (line), 43mv (din) speaker load impedance: 4ω to 8ω dimensions: 505 x 187 x 422mm weight: 16
$ 750
-
09% damping factor: 25 input sensitivity: 25mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 100db (line) output: 150mv (line) dimensions: 440 x 87 x 236mm weight: 47kg ---=== if you see this ad, is still available ===in great working condition kenwood ka-31 integrated amplifierspecifications: power output: 30 watts per channel into 8 ohms (stereo) frequency response: 10hz to 100khz total harmonic distortion: 0
$ 55
-
09% input sensitivity: 2qr code link to this post sony str-de505 receiver () good condition sony str-de505 specifications tuning range: fm, mw power output: 100 watts per channel into 8ω (stereo) surround output: 100w (front), 100w (center), 100w (rear) frequency response: 10hz to 50khz total harmonic distortion: 03kg accessories: remote control5mv (mm), 200mv (line) signal to noise ratio: 74db (mm), 82db (line) output: 150mv (line) video connections: composite dimensions: 430 x 148 x 295mm weight: 7
$ 45
-
If you are looking for a throttle sensitivity controller installation service, then velocityperformanceproducts  throttle sensitivity controller installation   contact us:- velocity performance products kelowna british columbia canadawe provide you the best throttle sensitivity controller installation service at an affordable pricefor more, visit our website
-
3% input sensitivity: 2wake up the neighbors for 80 bucks sony str-d715 specifications tuning range: fm, mw power output: 100 watts per channel into 8ω (stereo) surround output: 80w (front), 80w (center), 25w (rear) frequency response: 10hz to 50khz total harmonic distortion: 05mv (mm), 250mv (line) signal to noise ratio: 75db (mm), 82db (line) output: 250mv (line) video connections: composite dimensions: 430 x 148 x 355mm
$ 80
-
Used for 6 months in an office for presentation applicationwestinghouse hdtv 46 inch 120 hz/ p resolution- srs and hdmi inputs: near new in original box and all packaging
$ 210
-
Used asus vg248qe hz widescreen led backlight lcd 3d monitor 144hz rapid refresh rate 16this monitor would be great for a pc gamer or even a gamer playing on a game consolemost tvs only have a 60hz refresh rateyork, pa  hours: mon-fri 10am-5pm sat 10am-2pm  can't make it to the store? visit us at roetechnologies7 million display colors contrast ratio hdmi display port/dual link dvi-d full hd x w x 2 stereo rms  tilt, pivot movement, & height adjustment this monitor is in great cosmetic condition & has been tested to work 100%net roe technologies 330 sthis monitor is  144hz!! only $199 roe technologies 330 s
$ 199
-
Selling lg 42 inch p, 120 hz led smart tv with free tv stand it comes with remote and tv stand used on guest room for 1 and half year i can deliver only in edmonton interested call/text
$ 350
-
Like new lg hz smart tvperfect to mount on wallpaid 800 asking 400only a few years old and in perfect condition